/**
 * @Author: 李建
 * @Date: 2025/5/2 11:48
 * Description: 系统设置功能
 * Copyright: Copyright (©) 2025 永续绿建. All rights reserved.
 */
#ifndef WIRE_CONTROLLER_SETTING_H
#define WIRE_CONTROLLER_SETTING_H

#include <stdint.h>
#include <stdbool.h>

//#define NVS_POWER_CONTROLLER "power" // 电源

#define NVS_MIN_HUM "min_hum" // 最小湿度
#define FILTER_LIFE_TIME "filter_life_time" //滤芯最大使用寿命

#define AIR_EXHAUST_FIRST_VOL  "exhaust_first_vol" //  排风风机一档电压
#define AIR_EXHAUST_SECOND_VOL "exhaust_second_vol" //  排风风机二档电压
#define AIR_EXHAUST_THIRD_VOL "exhaust_third_vol" //  排风风机三档电压
#define AIR_EXHAUST_FOURTH_VOL "exhaust_fourth_vol" //  排风风机四档电压
#define AIR_EXHAUST_FIFTH_VOL "exhaust_fifth_vol" //  排风风机五档电压

#define AIR_SUPPLY_FIRST_VOL "supply_first_vol" //  送风风机一档电压
#define AIR_SUPPLY_SECOND_VOL "supply_second_vol" //  送风风机二档电压
#define AIR_SUPPLY_THIRD_VOL "supply_third_vol" //  送风风机三档电压
#define AIR_SUPPLY_FOURTH_VOL "supply_fourth_vol" //  送风风机四档电压
#define AIR_SUPPLY_FIFTH_VOL "supply_fifth_vol" //  送风风机五档电压
#define NVS_REPORT_DATA_DURATION "report_dur" // 上报数据间隔

#define NVS_SOUND_ON_OFF_KEY "S_ON_OFF"
#define NVS_SCREEN_AUTO_OFF_KEY "SCREEN_A_O"
#define NVS_SOUND_VOLUME_KEY "S_VOLUME"
#define NVS_SCREEN_OFF_MINUTE_KEY "SCREEN_O_M"
#define NVS_SCREEN_ON_OFF "scr_on_off" // 屏幕当前状态
/**
 * 定义系统设定参数结构体
 */
typedef struct {
    uint16_t set_min_hum;
    uint8_t filter_life_remaining;
    uint16_t filter_life_time;

    uint16_t exhaust_first_vol;
    uint16_t exhaust_second_vol;
    uint16_t exhaust_third_vol;
    uint16_t exhaust_fourth_vol;
    uint16_t exhaust_fifth_vol;

    uint16_t supply_first_vol;
    uint16_t supply_second_vol;
    uint16_t supply_third_vol;
    uint16_t supply_fourth_vol;
    uint16_t supply_fifth_vol;
    uint8_t sound_on_off; // 声音开关
    uint8_t screen_auto_off; // 是否自动关屏
    uint8_t sound_volume; // 声音音量大小
    uint8_t screen_off_minute; // 屏幕自动关屏时间
    uint8_t timer_status;    // 定时器状态
    uint8_t duration;        // 定时器时间
    uint8_t report_data_duration;
} system_setting_t;

/**
 * 读取系统设定参数
 * @param setting
 */
void read_system_setting(system_setting_t *setting);

/**
 * 保存系统配置
 */
void save_system_setting(system_setting_t * setting);

/**
 * 保存风阀配置信息
 * @param setting
 * @param ctrl_no 控制编号 （1-5）
 * @param fan_valve_no 风阀编号（1-5）
 * @param value 0或1，代表关联与取消关联
 */
void save_fan_valve_setting(system_setting_t *setting, uint8_t ctrl_no, uint8_t fan_valve_no, uint8_t value);
/**
 * 熄屏计时器初始化
 */
void screen_off_timer_init( system_setting_t * setting);
/**
 * 重置屏幕熄灭
 */
bool reset_screen_off();
#endif //WIRE_CONTROLLER_SETTING_H