wj-controller/main/app/modbus_master.c

/**
 * @Author: 李建
 * @Date: 2025/4/27 15:35
 * Description: 实现485主站
 * Copyright: Copyright (©) 2025 永续绿建. All rights reserved.
 */
#include <esp_err.h>
#include "modbus_master.h"
#include "mbcontroller.h"

#define OPTS(min_val, max_val, step_val) { .opt1 = min_val, .opt2 = max_val, .opt3 = step_val }
static const char *TAG = "MODBUS_MASTER";

enum {
    // 分风箱主板从站号
    MB_DEVICE_FFX_ADDR = 1,
    // 分控一从站号
    MB_DEVICE_FK_1_ADDR = 2,
    // 分控二从站号
    MB_DEVICE_FK_2_ADDR = 3,
    // 分控三从站号
    MB_DEVICE_FK_3_ADDR = 4,
    // 分控四从站号
    MB_DEVICE_FK_4_ADDR = 5,
};
static void *master_handle = NULL;

#define STR(fieldname) ((const char *)( fieldname ))


const mb_parameter_descriptor_t device_parameters[] = {
        // { CID, Param Name, Units, Modbus Slave Addr, Modbus Reg Type, Reg Start, Reg Size, Instance Offset, Data Type, Data Size, Parameter Options, Access Mode}
        {CID_POWER,        STR("power"),        STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                POWER_REG_ADDRESS,        1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_MODE,         STR("mode"),         STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                WORK_MOD_REG_ADDRESS,     1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_MODE,     STR("fan_mode"),     STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_MODE_REG_ADDRESS,     1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_SPEED,    STR("fan_speed"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_LEVEL_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_1_DEGREE, STR("fan_1_degree"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_VALVE_1_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_2_DEGREE, STR("fan_2_degree"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_VALVE_2_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_3_DEGREE, STR("fan_3_degree"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_VALVE_3_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_4_DEGREE, STR("fan_4_degree"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_VALVE_4_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_FAN_5_DEGREE, STR("fan_5_degree"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                FAN_VALVE_5_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_SET_TEMP,     STR("set_temp"),     STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                SET_TEMP_REG_ADDRESS,     1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_VOLTAGE_1,    STR("voltage_1"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                VOLTAGE_1_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_VOLTAGE_2,    STR("voltage_2"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                VOLTAGE_2_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_VOLTAGE_3,    STR("voltage_3"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                VOLTAGE_3_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_VOLTAGE_4,    STR("voltage_4"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                VOLTAGE_4_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_VOLTAGE_5,    STR("voltage_5"),    STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                VOLTAGE_5_REG_ADDRESS,    1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_ENV_TEMP,     STR("env_temp"),     STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                ENV_TEMP_REG_ADDRESS,     1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_ENV_HUMIDITY, STR("env_humidity"), STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                ENV_HUMIDITY_REG_ADDRESS, 1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},
        {CID_PM25,         STR("pm25"),         STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                PM25_NUMBER_REG_ADDRESS,  1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ},
        {CID_CO2,          STR("co2"),          STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                CO2_NUMBER_REG_ADDRESS,   1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ},
        {CID_INNER_ADDR,          STR("addr"),          STR(""), MB_DEVICE_FFX_ADDR, MB_PARAM_HOLDING,
                GMV_INTERNAL_NUMBER_REG_ADDRESS,   1, 0, PARAM_TYPE_U16, 2, OPTS(0, 0, 0), PAR_PERMS_READ_WRITE},

};

// Calculate number of parameters in the table
const uint16_t num_device_parameters = (sizeof(device_parameters) / sizeof(device_parameters[0]));


IRAM_ATTR static esp_err_t master_init() {
    // Initialize Modbus controller
    mb_communication_info_t comm = {
            .ser_opts.port = MB_PORT_NUM,
            .ser_opts.mode = MB_RTU,
            .ser_opts.baudrate = MB_DEV_SPEED,
            .ser_opts.parity = MB_PARITY_NONE,
            .ser_opts.response_tout_ms = 1000,
            .ser_opts.data_bits = UART_DATA_8_BITS,
            .ser_opts.stop_bits = UART_STOP_BITS_1
    };
    ESP_LOGI(TAG, "Modbus controller initialized...");
    esp_err_t err = mbc_master_create_serial(&comm, &master_handle);
    MB_RETURN_ON_FALSE((master_handle != NULL), ESP_ERR_INVALID_STATE, TAG,
                       "mb controller initialization fail.");
    MB_RETURN_ON_FALSE((err == ESP_OK), ESP_ERR_INVALID_STATE, TAG,
                       "mb controller initialization fail, returns(0x%x).", (int) err);

    // Set UART pin numbers
    err = uart_set_pin(MB_PORT_NUM, MB_GPIO_TX, MB_GPIO_RX,
                       UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
    MB_RETURN_ON_FALSE((err == ESP_OK), ESP_ERR_INVALID_STATE, TAG,
                       "mb serial set pin failure, uart_set_pin() returned (0x%x).", (int) err);

    err = mbc_master_start(master_handle);
    MB_RETURN_ON_FALSE((err == ESP_OK), ESP_ERR_INVALID_STATE, TAG,
                       "mb controller start fail, returned (0x%x).", (int) err);

    // Set driver mode to Half Duplex
    err = uart_set_mode(MB_PORT_NUM, UART_MODE_UART);
    MB_RETURN_ON_FALSE((err == ESP_OK), ESP_ERR_INVALID_STATE, TAG,
                       "mb serial set mode failure, uart_set_mode() returned (0x%x).", (int) err);

    vTaskDelay(5);
    err = mbc_master_set_descriptor(master_handle, &device_parameters[0], num_device_parameters);
    MB_RETURN_ON_FALSE((err == ESP_OK), ESP_ERR_INVALID_STATE, TAG,
                       "mb controller set descriptor fail, returns(0x%x).", (int) err);
    ESP_LOGI(TAG, "Modbus master stack initialized...");
    return err;
}

//static void *master_get_param_data(const mb_parameter_descriptor_t *param_descriptor)
//{
//    assert(param_descriptor != NULL);
//    void *instance_ptr = NULL;
//    if (param_descriptor->param_offset != 0) {
//        switch(param_descriptor->mb_param_type)
//        {
//            case MB_PARAM_HOLDING:
//                instance_ptr = ((void *)&holding_reg_params + param_descriptor->param_offset - 1);
//                break;
//            default:
//                instance_ptr = NULL;
//                break;
//        }
//    } else {
//        ESP_LOGE(TAG, "Wrong parameter offset for CID #%u", (unsigned)param_descriptor->cid);
//        assert(instance_ptr != NULL);
//    }
//    return instance_ptr;
//}
void modbus_master_task(void *arg) {
    vTaskDelay(5000 / portTICK_PERIOD_MS);
    ESP_LOGI(TAG, "Modbus master task started...");
    esp_err_t err = ESP_OK;
    uint8_t temp_data[2] = {0}; // temporary buffer to hold maximum CID size
    uint8_t type = 0;
    const mb_parameter_descriptor_t *param_descriptor = NULL;
    for (;;) {
        mb_param_request_t req = {
                .slave_addr = 0x05,
                .reg_size = 10,
                .reg_start = 0x23,
                .command = 0x10
        };
        uint16_t data[20] = {0, 1 , 2, 3, 4, 5, 6, 7, 8, 9};
        send_request(&req, &data[0]);
        err = mbc_master_get_cid_info(master_handle, 55, &param_descriptor);
        for (uint16_t cid = 0; (err != ESP_ERR_NOT_FOUND) && cid < 1; cid++) {
            err = mbc_master_get_cid_info(master_handle, cid, &param_descriptor);
            if ((err != ESP_ERR_NOT_FOUND) && (param_descriptor != NULL)) {
                err = mbc_master_get_parameter(master_handle, param_descriptor->cid, (uint8_t *) temp_data, &type);
                if (err == ESP_OK) {
                    ESP_LOGI(TAG, "Characteristic #%d %s (%s) value = %d read successful.",
                             param_descriptor->cid,
                             (char *) param_descriptor->param_key,
                             (char *) param_descriptor->param_units,
                             *(uint16_t *) temp_data);
                } else {
                    ESP_LOGE(TAG, "Characteristic #%d (%s) read fail, err = 0x%x (%s).",
                             param_descriptor->cid,
                             (char *) param_descriptor->param_key,
                             (int) err,
                             (char *) esp_err_to_name(err));
                }
            }
            vTaskDelay(1000 / portTICK_PERIOD_MS);
        }
        vTaskDelay(5000 / portTICK_PERIOD_MS);
    }
}

 void modbus_master_init() {
    ESP_LOGI(TAG, "Modbus master init...");
    ESP_ERROR_CHECK(master_init());
    vTaskDelay(10);
    xTaskCreatePinnedToCore(modbus_master_task, "modbus_master_task", 4 * 1024, NULL, 5, NULL, 1);
}

esp_err_t mm_set_param(uint16_t cid, uint8_t *value) {
    uint8_t type = PARAM_TYPE_U16;
    return mbc_master_set_parameter(master_handle, cid, value, &type);
}
esp_err_t mm_get_param(uint16_t cid, uint8_t *value) {
    uint8_t type = PARAM_TYPE_U16;
    return mbc_master_get_parameter(master_handle, cid, value, &type);
}


esp_err_t send_request(mb_param_request_t *request, void * data_prt) {
    return mbc_master_send_request(master_handle, request, data_prt);
}

void modbus_master_destroy() {
    mbc_master_delete(master_handle);
}