sparrow-kit/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h

/**
  ******************************************************************************
  * @file    stm32f1xx_hal_hcd.h
  * @author  MCD Application Team
  * @brief   Header file of HCD HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_HCD_H
#define __STM32F1xx_HAL_HCD_H

#ifdef __cplusplus
 extern "C" {
#endif

#if defined(STM32F105xC) || defined(STM32F107xC)


/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_ll_usb.h"

/** @addtogroup STM32F1xx_HAL_Driver
  * @{
  */

/** @addtogroup HCD
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/
/** @defgroup HCD_Exported_Types HCD Exported Types
  * @{
  */

/**
  * @brief  HCD Status structure definition
  */
typedef enum
{
  HAL_HCD_STATE_RESET    = 0x00U,
  HAL_HCD_STATE_READY    = 0x01U,
  HAL_HCD_STATE_ERROR    = 0x02U,
  HAL_HCD_STATE_BUSY     = 0x03U,
  HAL_HCD_STATE_TIMEOUT  = 0x04U
} HCD_StateTypeDef;

typedef USB_OTG_GlobalTypeDef   HCD_TypeDef;
typedef USB_OTG_CfgTypeDef      HCD_InitTypeDef;
typedef USB_OTG_HCTypeDef       HCD_HCTypeDef;
typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef;
typedef USB_OTG_HCStateTypeDef  HCD_HCStateTypeDef;

/**
  * @brief  HCD Handle Structure definition
  */
typedef struct
{
  HCD_TypeDef               *Instance;  /*!< Register base address    */
  HCD_InitTypeDef           Init;       /*!< HCD required parameters  */
  HCD_HCTypeDef             hc[15U];     /*!< Host channels parameters */
  HAL_LockTypeDef           Lock;       /*!< HCD peripheral status    */
  __IO HCD_StateTypeDef     State;      /*!< HCD communication state  */
  void                      *pData;     /*!< Pointer Stack Handler    */
} HCD_HandleTypeDef;

/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup HCD_Exported_Constants HCD Exported Constants
  * @{
  */
/** @defgroup HCD_Speed HCD Speed
  * @{
  */
#define HCD_SPEED_LOW                2U
#define HCD_SPEED_FULL               3U

/**
  * @}
  */

/**
  * @}
  */ 

/* Exported macro ------------------------------------------------------------*/
/** @defgroup HCD_Exported_Macros HCD Exported Macros
 *  @brief macros to handle interrupts and specific clock configurations
 * @{
 */
#define __HAL_HCD_ENABLE(__HANDLE__)                       USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_HCD_DISABLE(__HANDLE__)                      USB_DisableGlobalInt ((__HANDLE__)->Instance)
   
   
#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)    
   
   
#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__)       (USBx_HC(chnum)->HCINT = (__INTERRUPT__)) 
#define __HAL_HCD_MASK_HALT_HC_INT(chnum)                  (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM) 
#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum)                (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM) 
#define __HAL_HCD_MASK_ACK_HC_INT(chnum)                   (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM) 
#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum)                 (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM) 

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup HCD_Exported_Functions HCD Exported Functions
  * @{
  */

/* Initialization/de-initialization functions  ********************************/
/** @addtogroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
  * @{
  */
HAL_StatusTypeDef      HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef      HAL_HCD_DeInit (HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef      HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
                                       uint8_t ch_num,
                                       uint8_t epnum,
                                       uint8_t dev_address,
                                       uint8_t speed,
                                       uint8_t ep_type,
                                       uint16_t mps);

HAL_StatusTypeDef      HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,
                                       uint8_t ch_num);

void                   HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
void                   HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
/**
  * @}
  */

/* I/O operation functions  ***************************************************/
/** @addtogroup HCD_Exported_Functions_Group2 IO operation functions
  * @{
  */
HAL_StatusTypeDef      HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
                                                uint8_t pipe,
                                                uint8_t direction,
                                                uint8_t ep_type,
                                                uint8_t token,
                                                uint8_t* pbuff,
                                                uint16_t length,
                                                uint8_t do_ping);

 /* Non-Blocking mode: Interrupt */
void                   HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
void                   HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
void                   HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
void                   HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
void                   HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
                                                           uint8_t chnum,
                                                           HCD_URBStateTypeDef urb_state);
/**
  * @}
  */
/* Peripheral Control functions  **********************************************/
/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
  * @{
  */
HAL_StatusTypeDef      HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef      HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef      HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
/**
  * @}
  */
/* Peripheral State functions  ************************************************/
/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
  * @{
  */
HCD_StateTypeDef       HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
HCD_URBStateTypeDef    HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
uint32_t               HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
HCD_HCStateTypeDef     HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
uint32_t               HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
uint32_t               HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
/**
  * @}
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup HCD_Private_Macros HCD Private Macros
 * @{
 */
/** @defgroup HCD_Instance_definition HCD Instance definition
  * @{
  */
 #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
/**
  * @}
  */
/**
  * @}
  */
 
/**
  * @}
  */

/**
  * @}
  */

#endif /* STM32F105xC || STM32F107xC */


#ifdef __cplusplus
}
#endif

#endif /* __STM32F1xx_HAL_HCD_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/