stm32f103c8_blue_pill.cfg 938 B

1234567891011121314151617
  1. # SPDX-License-Identifier: GPL-2.0-or-later
  2. # STM32F103C8 "Blue Pill"
  3. # NOTE:
  4. # There is a fair bit of confusion about whether the "Blue Pill" has 128kB or 64kB flash size.
  5. # The most likely cause is that there exist a -C8 and a -CB variant of the STM32F103, where
  6. # the C8 has 64kB, the CB has 128kB as per specification. "Blue Pill" boards are manufactured
  7. # by a lot of different vendors, some may actually use the CB variant but from a cursory look
  8. # it very hard to tell them apart ("C8" and "CB" look very similar). Nevertheless, people have
  9. # tried using the full 128kB of flash on the C8 and found it to be working. Hence this board file
  10. # overrides the internal size detection. Be aware though that you may be using you particular
  11. # board outside of its specification. If in doubt, comment the following line.
  12. set FLASH_SIZE 0x20000
  13. source [find interface/stlink.cfg]
  14. transport select hla_swd
  15. source [find target/stm32f1x.cfg]